File list

Jump to: navigation, search

This special page shows all uploaded files.

File list
 
Date Name Thumbnail Size User Description Versions
19:27, 5 March 2020 Mini K-Ceptor by Valor.jpg (file) 558 KB Daylankifky   1
18:57, 5 March 2020 Addon-28-areas.jpg (file) 390 KB Daylankifky   2
18:45, 5 March 2020 Addon-28-init session.jpg (file) 24 KB Daylankifky   1
18:43, 5 March 2020 Install addon blender28.jpg (file) 44 KB Daylankifky   1
18:38, 5 March 2020 Chordata blender28 addon.jpg (file) 391 KB Daylankifky   1
10:03, 20 July 2019 Rj12cable.jpg (file) 94 KB Daylankifky   2
10:03, 20 July 2019 Twisted pairs.jpg (file) 82 KB Daylankifky Three twisted pairs from a regular Ethernet cable 1
10:02, 20 July 2019 Crimped RJ11.jpg (file) 73 KB Daylankifky A crimped RJ12 cable with the wires mirrored on both ends 1
08:29, 21 May 2019 Soldering with camera.jpg (file) 355 KB Daylankifky A snapshot of the early soldering process 1
15:38, 24 April 2019 Sensor fixingsR2.2.jpg (file) 125 KB Daylankifky Fixing for the K-Ceptor with velcro glued to a separate layer 1
12:25, 15 April 2019 Filezilla site manager.png (file) 57 KB Daylankifky   1
16:11, 12 April 2019 Hub-3KC-hierarchy.png (file) 5 KB Daylankifky A hierarchy with one Hub and three K-Ceptors 1
16:11, 12 April 2019 3KC-hierarchy.png (file) 3 KB Daylankifky a hierarchy a Hub and with 3 K-Ceptors 1
13:50, 11 April 2019 Beta-kit-parts.jpg (file) 326 KB Daylankifky parts from a beta-testing DIY kit 1
13:18, 11 April 2019 Raspberry-hub-wiring.png (file) 741 KB Daylankifky -complete Rpi and Hub -Hub R1.2 2
09:56, 9 April 2019 PuTTY 0.62 on Windows 8.png (file) 7 KB Admin PuTTY 0.62 main configuration dialog on Windows 8 by: Adrenaline ru [CC BY-SA 3.0 (https://creativecommons.org/licenses/by-sa/3.0)] 1
09:34, 9 April 2019 K-Ceptor-wired.jpg (file) 112 KB Admin   2
15:22, 8 April 2019 SBC power source selection.jpeg (file) 180 KB Admin A jumper connecting pins 2 and 3 of the JP1 on the Chordata Hub. It allows to select the SBC power source 1
15:03, 8 April 2019 Dedicated power source selection.jpeg (file) 172 KB Admin A jumper connecting pins 1 and 2 of the JP1 on the Chordata Hub. It allows to select the dedicated power source 1
14:57, 8 April 2019 Dedicated power source supply.jpeg (file) 98 KB Admin A 10400mAh powerbank powering the Hub. The 5V output from the Hub (USB) powers the SBC 1
14:54, 8 April 2019 SBC power source supply.jpeg (file) 95 KB Admin A 10400mAh powerbank powering the SBC. The Hub is using the 3v3 rail from the SBC 1
14:33, 8 April 2019 Powerbank.jpg (file) 294 KB Admin 10400mAh Power bank and Raspberry Pi. 1
10:27, 7 November 2018 DefBypedConf-IDModules.png (file) 185 KB Daylankifky Distribution of ID modules on the Default Biped Configuration 1
16:28, 19 October 2018 Simpler infographic.png (file) 1.11 MB Daylankifky added license note. 2
13:11, 19 October 2018 Magnetometer calibration.gif (file) 6.94 MB Daylankifky '''How the magnetometer calibration procedure has to be done.''' These steps should be repeated for all six faces: *Hold the box in front of you and make sure to keep the current face as parallel to the ground as possible. *Put the letter “a” of th... 1
11:38, 19 October 2018 Sensor fixings.jpg (file) 157 KB Daylankifky Piece of a basic fixing system for the Chordata nodes: *Elastic strap with velcro. *K-Ceptor with layer of foam and velcro. 1
11:35, 19 October 2018 Torso-fixings.JPG (file) 384 KB Daylankifky Part of the first Chordata working prototype. The image shows how a basic fixing system for the Chordata nodes can be done. 1
11:30, 19 October 2018 Addon-connect.png (file) 67 KB Daylankifky The toolbox of the viewport on blender 2.79. In the image the Chordata add-on tab is shown 1
11:28, 19 October 2018 Install addon.jpg (file) 108 KB Daylankifky User preferences window in Blender 2.79 1
11:25, 19 October 2018 Etcher-gif.gif (file) 234 KB Daylankifky Image flashing procedure using Etcher By resin.io (https://etcher.io/#downoloads) [CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0)], via Wikimedia Commons 1
11:21, 19 October 2018 Raspberry-Hub.jpg (file) 299 KB Daylankifky A Raspberry pi 3 connected to the Chordata Hub through female jumper wires 1
11:19, 19 October 2018 Chordata parts.jpg (file) 223 KB Daylankifky The chordata hardware parts: -K-Ceptors -ID Modules -Hub -RJ-12 Cables 1
14:07, 18 October 2018 KC calibration box.jpg (file) 138 KB Daylankifky Helper box to perform sensor calibration 1
08:36, 18 October 2018 Remote console.png (file) 27 KB Daylankifky   1
15:51, 17 October 2018 Chordata blender addon.jpg (file) 178 KB Daylankifky   1
15:24, 17 October 2018 Sensor-fixing-socket.png (file) 984 KB Daylankifky   1
14:07, 17 October 2018 DefBipedConf.png (file) 56 KB Daylankifky   1
13:48, 17 October 2018 Rj12-connector.jpg (file) 92 KB Daylankifky   1
12:27, 17 October 2018 Notochord banner.png (file) 55 KB Daylankifky The banner displayed when accessing the Chordata linux image's shell. 1
10:32, 17 October 2018 GeneralDiagram.png (file) 61 KB Daylankifky The main parts of the chordata system and how they relate to each other. 1
13:41, 16 October 2018 KC-R2.jpg (file) 1.16 MB Daylankifky Three steps on the assembling process of the K-Ceptor R2 1
11:31, 16 October 2018 Chordata ari trias.jpg (file) 264 KB Daylankifky First usage of the chordata system on a public live performance. The dancer was: Arianna Serra 1